Full Shutdown Procedure

Perform this activity while your vehicle is parked, and the engine is off.

1. UNPLUG the Raven device from its power source (either from the Raven’s power port or the vehicle’s OBD port).
   
   
2. PRESS and HOLD the power button on the base of the device for 30 to 60 seconds, until the logo disappears and the screen is black.
   
   
   Raven+
   
   RavenPro
   
3. RELEASE the button.
4. Raven+ 
   1. Wait at least 15 seconds for all LEDs inside the Raven to turn OFF by looking through the vent holes at the BOTTOM of the Raven.
      
       
5. RavenPro 
   1. Wait at least 15 seconds for all LEDs inside the Raven to turn OFF by looking through the vent holes at the TOP of the Raven.
      
       
6. RECONNECT power to the Raven device.
7. The Raven device should proceed through its normal boot sequence as shown below.
   
   Raven+
   
   RavenPro